Your Cart

8 Channel RC Switch Mk2

8 Channel RC Switch Mk2
8 Channel RC Switch Mk2

8 Channel RC Switch Overview

The MK2 version is a smaller, re-packaged version of the MK1, now in a custom 3D printed case with a laser cut and engraved clear acrylic top. In addition a set-up button has been added to allow users to configure outputs to be latching or momentary action and to be on/off at power-up.

Up to 8 channels of lighting (or other low current accessories) can be individually controlled from a single proportional RC channel. rom a single proportional RC channel. 
Channel selection is simple - pump the joystick 3 times in one direction and hold to turn on output #3 and so on. Pump the stick in the opposite direction the same number of times and hold to turn that output off.
The unit is supplied with a blank ABS case, the user being required to cut slots/holes  in the top of the lid to admit the signal input from the receiver, the LED, and to access the screw heads on the connector block. A further slot in the side of the case is required to admit power wiring to the terminal block. A full size plastic film template is provided showing the required locations.
Key Features 
  • 8 individually addressable independent outputs
  • outputs rated 500mA each at up to 50v
  • outputs configurable to be ON/OFF at power up
  • outputs configurable to be LATCHING/MOMENTARY action
  • outputs switch to 0v so loads should have a common positive rail
  • flyback diodes on each output so inductive loads can be switched (relays, motors)
  • red/green LED shows joystick movement
  • optional lamp test at power-up
  • terminal block for easy connections


Write a review

Note: HTML is not translated!
Bad Good
Ex Tax: £22.50
  • Stock: 3
  • Model: FE04 8 Channel RC Switch Mk 2
  • SKU: FE04 8 Channel RC Switch Mk 2
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.