Scale Warship Blog RSS Feed

This is a new fret that simulates Wood Grating on open decks and is particularly relevant to the open bridges found on prewar and early wartime ships. The grating is arranged in 10mm by 11mm blocks with 0.5mm square holes set in a grid of 7 by 8 . The fret is 180mm by 78mm and can easily be cut to any shape that will fit into that size.To purchase ..

Scale Warship would like to apologise for any delays in receiving your goods. Most of the problems being encountered are caused by the Royal Mail Cyber attack and from which, they have not yet recovered.I am still unable to send any International Mail through my normal Post Office system. I am currently evaluating the benefits of using a courier se..

This mast details set was developed for a commission build of the Type 61 Cathedral Class, HMS Salisbury. The etch set adds platforms, ladders and railings to the mast which on the later refit is a solid version...

Stern and Fo’c’sle name letters in etch for the Arleigh Burke Destroyer Class in 72nd scale (Michael Murphy and Jason Dunham Illustrated) There are over 100 names in this class and therefore not all the names are available yet. To date the names listed below are on the first etching. If your requirement is not on this list please contact us and w..

Our new website is now online. It is a bit different than the previous site so please take a little time to find your way around the shop. In order to update the site the pages were not available for the last couple of hours so that we didn't miss any orders. If you have tried in the last hour or two and found the site down please note the reason. ..

The latest Photo Etch to be released for the Arleigh Burke Class of Destroyers  is the Helideck set of Tie Downs, Lights, Hooks and Straps. This new fret is a must for the modeller with an eye for detail. This fret will enhance the appearance of the Flight Deck with its Helicopter strapped down and comes with an A3 drawing of the Flight deck sh..

Recently added to the store, these 1 mm thick acrylic discs are available in 3 mm, 4 mm and 5 mm diameter. They are designed to fit the portholes in our hulls where the normal size for 96th scale is a 3 mm hole and 4 mm for 72nd scale. Some larger vessels may require larger and therefore I have added 5 mm to the range. The 3 mm and 4 mm sets of..

Robin Carpenter commissioned Scalewarship to make a small set of portholes and doors for his 1/200th scale Titanic. The Etched portholes and acrylic windows are now available as a set only. Click here to buy..

This set of Aegis Spy 1 Radar plates will enhance any superstructure. Produced for the Arleigh Burke Class  at 72nd scale, these plates are also suitable for any other class of ship which carries them.  Click Here to view the product..

Following the successful introduction of the 12v Distribution Board we are pleased to announce the latest in the series which is the 6v Distribution Board. Designed by the late Alan Bond the board is laid out similarly to the 12v version so that anyone who knows the 12v version will immediately be comfortable with the layout. As with the origin..

 We have scaled up our popular 96th  scale RN Railings set to 72nd scale. The set includes 5 drilling  templates with different spacings and corners.     Click here to view the item...

Our new Exhaust detail was released at the Yeovilton Spring Show on Saturday 20th February 2016 and is now available from our website. The set includes a Photo Etch set with replacement fuselage panels, Exhaust seat backing plate and spacer with additional surface detail. The Exhausts are 3D printed in HDS. Also included is brass wire for extra..