8 Channel RC Switch Mk2
8 Channel RC Switch Overview
The MK2 version is a smaller, re-packaged version of the MK1, now in a custom 3D printed case with a laser cut and engraved clear acrylic top. In addition a set-up button has been added to allow users to configure outputs to be latching or momentary action and to be on/off at power-up.
Up to 8 channels of lighting (or other low current accessories) can be individually controlled from a single proportional RC channel. rom a single proportional RC channel.
Channel selection is simple - pump the joystick 3 times in one direction and hold to turn on output #3 and so on. Pump the stick in the opposite direction the same number of times and hold to turn that output off.
The unit is supplied with a blank ABS case, the user being required to cut slots/holes in the top of the lid to admit the signal input from the receiver, the LED, and to access the screw heads on the connector block. A further slot in the side of the case is required to admit power wiring to the terminal block. A full size plastic film template is provided showing the required locations.
Key Features
- 8 individually addressable independent outputs
- outputs rated 500mA each at up to 50v
- outputs configurable to be ON/OFF at power up
- outputs configurable to be LATCHING/MOMENTARY action
- outputs switch to 0v so loads should have a common positive rail
- flyback diodes on each output so inductive loads can be switched (relays, motors)
- red/green LED shows joystick movement
- optional lamp test at power-up
- terminal block for easy connections
View/Download:
£22.50
Ex Tax: £22.50
- Stock: 5
- Model: FE04 8 Channel RC Switch Mk 2
- SKU: FE04 8 Channel RC Switch Mk 2
