Scale Warship is pleased to offer the next development in collaboration with Forge Electronics. Click here to buy
Up to 8 channels of lighting (or other low current accessories) can be individually controlled from a single proportional RC channel.
Channel selection is simple – pump the joystick 3 times in one direction and hold to turn on output #3 and so on. Pump the stick in the opposite direction the same number of times and hold to turn that output off.
The unit is supplied with a 3D printed case and a laser cut top which indicates the signal input from the receiver, the LED, and to access the screw heads on the connector block. A further slot in the side of the case is required to admit power wiring to the terminal block. A full size plastic film template is provided showing the required locations
Key Features
• 8 individually addressable independent outputs
• outputs rated 500mA each at up to 50v
• outputs switch to 0v so loads should have a common positive rail
• flyback diodes on each output so inductive loads can be switched (such as relays and motors)
• red/green LED shows joystick movement
• optional output test at power-up
• terminal block for easy connections